Tools & Equipments

ESAC International for the first time in Pakistan introduced modern sanitation tools and equipment’s to ease the operations within water and sanitation sector. ESAC International in affiliation with the top most reputed manufacturers of the tools, brings you the most effective and efficient tools to minimize your work force and time and smoothly carrying out the operations.

WATER LEAKAGE DETECTOR

One area in particular that is having no end of trouble are the water pipes in the world. Water mains all over the country are leaking by the thousands every year, and the situation is only getting worse. This is where water leak detection comes in, since they can’t be fixed if they can’t be found. ESAC Water detectors are of a high-performance water leak detectors designed for use by leakage technicians and plumbers to find leaks on water mains, water services and in residential or commercial properties. The acoustic microphone in this water leak detector amplifies the mechanical vibration created when water in a pressurized system exits the pipe wall. With an electronic listening stick, magnet, tripod microphone and ground microphone the operator can use this water leak detection kit to localize the leak position and then pinpoint it under the road, in soft ground, under concrete slab or in walls.

AUTO-CHLORINATORS

Water-related diseases responsible for 80 per cent of all illnesses, deaths in developing world. This is why chlorination of water is very important. Many public water systems add chlorine (a process known as “chlorination”) to their water supply for the purpose of disinfection. Disinfection kills or inactivates harmful microorganisms which can cause illnesses such as typhoid, cholera, hepatitis and giardiasis. Sometimes, water systems use chlorination for taste and odor control, iron and manganese removal, and to stop nuisance growths in wells, water pipes, storage facilities and conduits. ESAC brings you auto-chlorinator from the top manufacturer in the world which automatically monitor the and pumps the chlorine into the tube wells to ensure clean drinking water.

BORE-HOLE CAMERA

Well cameras are the tool of choice to perform remote visual inspection and downhole surveys of vertical bores, shafts, and water wells. These are commonly used for routine or post-service assessments, conditions evaluation and monitoring.

ULTRA-SONIC FLOW METER

An ultrasonic flow meter utilizes ultrasound to measure the velocity of a fluid and is used in a variety of fluid applications. Ultrasonic flowmeters are ideal for water and other liquids. Clamp-on ultrasonic flow meters achieve high accuracy at low and high flows, save time with no pipe cutting or process shutdown, and are not affected by external noise.

METALLIC/NON-METALLIC PIPE LOCATORS

In most of the world especially Pakistan, our sewerage line and other pipelines are buried underground and having to proper map, so it makes it very hard to find the underground pipes during civil works or pipe network mapping. A lot of workforce and financials are required to use it manually. Therefore, ESAC International brings you metallic and non-metallic pipe locators which use state-of-the-art electromagnetic locating technology to locate utility lines, sewer lines, pipelines,

energized electrical and telecommunications duct banks, and other subsurface hazards that may impede your excavation project.

MANHOLE COVER LOCATOR

The manhole cover locators allow you to determine the location of manhole metal under asphalt even at great depths. It is characterized by its high detection sensitivity combined with great handling and sturdiness.

SONIC WATER LEVEL METER

The sonic well depth meter has been designed with the well driller/pump installer in mind. The specially developed low frequency sonic measuring technique carries out fast, accurate measurements. No probes or wires need go down-hole to get hung up. Meter will measure 2-inch or larger wells, and even capped wells that have a 5/8” or larger access port.

WATER BACTERIOLOGICAL TESTING KIT

Private well water should be tested a minimum of once per year. Drinking water supplies obtained from shallow wells and surface water sources should be tested more frequently (i.e. seasonally), as they are more susceptible to contamination. It is important to test your drinking water at the tap and at the source. Testing both will help you determine if your treatment system is performing correctly, and if the quality of your source water has changed. ESAC International brings you a complete water Bacteriological Test Kit is the most advance of all the Bacteriological Test Kit family. It includes the Basic Single Incubator Kit with the addition of a portable digital Conductivity, Total Dissolved Solids (TDS), pH and Temperature meter, a Portable Photometer (capable of testing 70+ parameters – reagents must be ordered separately). It also includes a digital portable turbidity meter for accurate turbidity measurement.